Heat transfer rate analysis for ac condenser fines by material g al cu 4img 204, aluminium alloy al99 and magnesium alloy



 Air conditioner condensers are a heat exchanger device; AC condenser units are grouped according to how it rejects the heat to the medium (surround air). The primary component of a condenser is typically the condenser coil, through which the refrigerant flows. Since, the AC condenser coil contains refrigerant that absorbs heat from the surrounding air, the refrigerant temperature must be higher than the air. In this project designed an air-cooled Condenser fins for an air conditioner. Presently the material used for coils is Copper and the material used for Fins is Copper or aluminium G Al Cu 4IMG 204 whose thermal conductivity is 110-150W/m K. the condenser fines design using computer aided software catia. We are optimizing the design parameters by changing the thickness of the fin for the same length without failing the load conditions. To validate the temperatures and other thermal quantities like flux and gradient, thermal analysis is done on the condenser fines by applying copper for coil and Fin materials G Al Cu 4IMG 204, Aluminium Alloy Al99 and Magnesium alloy. Heat flux, directional heat flux, convection, Thermal analysis is done in ansys. And also we are varying inside cooling fluid Hydrocarbon (HC) and Hydro chloro flouro carbon (HCFC). The best material and best fluid for the condenser of our design can be checked by comparing the results. Optimization is done by changing the thickness of the catia is a parametric 3D modelling software and ansys is analysis software.    



ac condenser, G Al Cu 4IMG 204, Aluminium Alloy Al99 and Magnesium alloy, catia, thermal analysis

Full Text:



  • There are currently no refbacks.

Copyright (c) 2018 Edupedia Publications Pvt Ltd

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


EduPedia Publications Pvt Ltd, D-351, Prem Nagar-2, Suleman Nagar, Kirari, Nagloi, New Delhi PIN-Code 110086, India Through Phone Call us now: +919958037887 or +919557022047

All published Articles are Open Access at https://edupediapublications.org/journals/

Paper submission: editor@edupediapublications.com or edupediapublications@gmail.com

Editor-in-Chief       editor@edupediapublications.com

Mobile:                  +919557022047 & +919958037887

Websites   https://edupediapublications.org/journals/.

Journals Maintained and Hosted by

EduPedia Publications (P) Ltd in Association with Other Institutional Partners


Pen2Print and IJR are registered trademark of the Edupedia Publications Pvt Ltd.